Advantages of fully enclosed tool magazine
No matter how bad the processing environment is, it is not easy for iron filings to enter. Ensure the service life of the tool magazine and reduce tool changing failures. Extend the life of the spindle. The accuracy of processing is ensured.

Three-axis roller linear slide
The three axes adopt roller type linear rails, lengthened and widened flange sliders, wide contact surface with the guide rails, large load capacity, increased processing rigidity, processing stability, and improved accuracy that can replace hard rails.

About the features of FV-850
-The dual water pump method is adopted. One is to cool the cutting tools required when processing the workpiece, and the other is to remove the chipping generated by the processing at the same time. These are costs that many manufacturers are unwilling to increase, but we will never cut corners!
-The three-axis screw has been strictly pre-stretched, combined with exquisite scraping technology and balanced torque screws, all of which can make the machine tool as stable as a mountain and ensure machining accuracy!
-We know that the machine bed is the core foundation of the machine tool, so we pay great attention to the material and processing accuracy of the castings! The interior of the castings uses strong reinforcing ribs with reasonable distribution to ensure the stability and rigidity of the bed, and strictly controlled three-axis installation Geometric accuracy of adjustment.
-Three-axis displacement 48m/mm; Taiwan variable frequency tool magazine can be used, and the tool arm is controlled by the frequency converter to achieve stable tool change for heavy tools. Standard tools can be changed at high speed to improve product processing efficiency.